
SRP-2305-24-50CV
Product Data
- In compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2.
- Built-in DALI-2 interface, DALI DT6 device
- Compatible with universal DALI masters that support DT6 commands
- Dimmable LED driver
- Max. output power 50W
- 1 channels DC 12/24V constant voltage output
- Class Ⅱ power supply, full isolated plastic case
- High power factor and efficiency
- Compliant with Safety Extra Low Voltage standard
- Over load, over temperature protection
- IP20 rating, suitable for indoor LED lighting applications
- 5 years warranty

| Designation | DALI MCU |
| Power connection | L, N AC mains |
| Operating voltage | 100-240V AC |
| Power consumption | 2.3W max |
| DALI connection | DA+/DA-, max. 300m cable length, DALI power supply output current max 100mA. |
| Perm. Cable cross-section | 0.5…1.5 mm2 |
| Ambient temperature | 0…+50 °C |
| Type of protection | IP 20 |
| Protection class | II |
| Dimensions | 80x80x53mm |
1.2 Click any of the two buttons once to select a digit, click again to change the digit until the desired DALI address appears. Click first button to set “tens” position and second button to set “units” position. The address can be set from 00~63. 1.3 Then press and hold down any of the 2 buttons until the numeric digital display stops flashing to confirm the setting.
3.2 Click first button to select “1A” which means 1 address
3.3 Then press and hold down any of the 2 buttons until the numeric digital display stops flashing to confirm the setting
4.2. Press and hold down the button to increase or decrease light intensity to desired level and release it, then repeat the operation to adjust light intensity to opposite direction.
4.3. Memory function after power off or power failure enables the device to memorize the status before power off while power on again.


